FLEXI STREAMLINE 12V SINGLE COLOUR WHITE 50M ROLL FLB1208/S50M - 8W/M
Versatile, CRI>90, COB LED single colour white, 50M roll, maximum run length 5M, IP44, strip width 8mm.
Application
Ideal for residential or commercial features
Design Specifications
50 metre roll with adhesive tape, 5 metre run length, cuttable every 36mm
Beam distribution 140°, choice of 3000/4000/6000K
Streamline COB LED chip technology, providing a smooth lighting profile
Dimming options: (quick link)
Type A - Trailing edge dimming,
Type B - LED strip controller LT8915DIM/BT
with LT8914DIM/RP if required,
Type C - Analogue 1-10V
Type D - DALI 2 controlHeat sink required for system performance, LED channel options refer this section
12V constant voltage driver required, refer driver options
Performance
- Dimmable - OPTIONAL
- Dimmer Type - refer dimming options
WARM WHITE3000K
COOL WHITE4000K
DAYLIGHT6000K
-
Technical Specifications
Product Model No. Add to Enquiry Use your collection cart to make an enquiry, send your collection to a friend via email, or easily download multiple datasheets with a single clickInput Voltage Watts per metre Beam Angle CRI Lumens per metre LEDs Per Metre Cutting Interval CCT Body Colour Dim 
Model No. FLB1208WW/S Add to Enquiry Add Remove Remove Input Voltage 12 Watts per metre 8 Beam Angle 140 CRI 90 Lumens per metre 500 LEDs Per Metre 252 Cutting Interval 36 CCT 3000 Body Colour CLEAR Dim 1000(L) x 8(W) x 2(H) 
Model No. FLB1208CW/S Add to Enquiry Add Remove Remove Input Voltage 12 Watts per metre 8 Beam Angle 140 CRI 90 Lumens per metre 530 LEDs Per Metre 252 Cutting Interval 36 CCT 4000 Body Colour CLEAR Dim 1000(L) x 8(W) x 2(H) 
Model No. FLB1208DL/S Add to Enquiry Add Remove Remove Input Voltage 12 Watts per metre 8 Beam Angle 140 CRI 90 Lumens per metre 560 LEDs Per Metre 252 Cutting Interval 36 CCT 6000 Body Colour CLEAR Dim 1000(L) x 8(W) x 2(H) NOTE: code displayed are per M
(1) Due to continued product and technology enhancements, data sourced from sal.net.au shall not form part of any contract and or technical performance guarantee unless expressly confirmed in writing by SAL at the time of order. (2) Products are sold in accordance with SAL Terms and Conditions of sale and all images shown are for illustration purposes only and may vary from the actual colour or finish. (3) Unless specifically stated, all Interior product IP ratings nominated are from "below the ceiling". IC ratings (if any) apply to the downlight only. (4) VEET, IPART & REES approval validation must only be sourced via the dedicated web listed catalogues; icons shown (if any) on the relevant product page are a guide only and do not guarantee approvals for individual models. (5) With the exception of DIY lamps, all other products must be installed by a qualified electrical installer.
With over 1000 Australian trade partners, finding where to buy SAL products is easy. Search a trade partner nearby